$67.54
$96.58
Product DescriptionModelWAN interfacesLAN interfacesIntegrated USB 2.0C921-4P2 ports Gigabit Ethernet (GE)4-port GE managed switchYesC931-4P2 ports Gigabit Ethernet (GE)4-port GE managed switchYesC927-4P1 port GE and 1 VADSL (Annex A)4-port GE managed switchYesC926-4P1 port GE and 1 VADSL (Annex B/J)4-port GE managed switchYesC927-4PM1 port GE and 1 VADSL (Annex M)4-port GE managed switchYesTable 3. Cisco 900 Series ISRs LTE SKUsModelWANLAN switchIntegrated USB 2.0GEADSL2/VDSL2 LTE (CAT4)GEC921-4PLTEGB2NAYES4YesC921-4PLTEAU2NAYES4YesC921-4PLTEAS2NAYES4YesC927-4PLTEGB11 VA-DSL (Annex A)YES4YesC927-4PLTEAU11 VA-DSL (Annex A)YES4YesC927-4PMLTEGB11 VA-DSL (Annex M)YES4YesC926-4PLTEGB11 VA-DSL (Annex B/J)YES4YesTable 4. Cisco LTE 2.5 Bands SupportedModelC921-4PLTEGBC927-4PLTEGBC927-4PMLTEGBC926-4PLTEGBC921-4PLTEASC921-4PLTEAUC927-4PLTEAUBandsLTE bands 1, 3, 7, 8, 20, 28.FDD LTE 700 MHz (band 28),800 MHz (band 20), 900 MHz(band 8), 1800 MHz (band 3), 2100 MHz (band 1), and2600 MHz (band 7)LTE bands 1, 3, 5, 8, 40, 41FDD LTE 850 MHz (band 5 CLR), 900 MHz (band 8), 1800 MHz (band 3), and 2100 MHz (band 1). TDD LTE 2300 MHz (band 40), and 2500 MHz (band 41)LTE bands 1, 3, 5, 7, 8, 28FDD LTE 700 MHz (band 28), 850 MHz (band 5 CLR), 900 MHz (band 8), 1800 MHz (band 3), 2100 MHz (band 1), and 2600 MHz (band 7)Theoretical Category 4 download/upload speeds150 Mbps/50 Mbps150 Mbps/50 Mbps150 Mbps/50 MbpsEurope●Middle East with specific LTE bands/frequencies●Australia●China●India●Southeast Asia●Latin AmericaDependent upon specific operators supporting the LTE bands listed aboveDependent upon specific operators supporting the LTE bands listed aboveTable 5. Cisco LTEItemSpecificationImportant LTE features● Multichannel-Interface-Processor (MIP) profile configuration● Remotely initiated data callback using voice● Remotely initiated data callback using Short Message Service (SMS)● Remote firmware upgrade over LTE● SIM lock and unlock capabilitiesSingle SIM support● High reliability, and cellular multihoming support for single micro (3FF) SIMs card socket; compliant with ISO-7816-2 (SIM mechanical), Auto SIM carrier capability with correct firmware selectionSMS● Send and receive SMS (maximum 160 characters)Modem informationModem form factor: WP7600 series for Cisco LTE 2.5Wireless technologies supported (performance and throughput)Cisco LTE 2.5 (Refer to Table 10: LTE Bands Supported) Backward compatibility:● LTEGB, LTEAU: UMTS, HSPA (Band 1, 5, 8), EDGE, GSM, GPRS (900/1800)● LTEAS: UMTS, HSPA (Band 1, 8), EDGE, GSM, GPRS (900/1800)Included antenna● One multiband swivel-mount dipole antennas (LTE-ANTM-SMA-D) are included with all Cisco LTE 2.5 (Recommend to order 2 nd LTE-ANTM-SMA-D option for better 2X2 MIMO coverage)For –N antenna and cable installation guidance, view the Connected Grid Antennas Installation GuideCarrier support● For a list of carriers that offer services on the Cisco 1100 Series LTE Advanced 3.0, please visit the Wireless Carrier Partners pageProduct SpecificationsTable 5 shows Cisco IOS Software features and general system specifications for the 900 Series ISRs.Table 6. Cisco IOS Software Features and System SpecificationsFeatureSpecificationCisco IOS SoftwareIP and IP services● Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)● Generic Routing Encapsulation (GRE) and Multipoint GRE (MGRE)● Cisco Express Forwarding● Standard 802.1d Spanning Tree Protocol● Layer 2 Tunneling Protocol (L2TP)● L2TP Version 3 (L2TPv3)● Network Address Translation (NAT)● Dynamic Host Configuration Protocol (DHCP) server, relay, and client● Dynamic DNS● DNS Proxy and DNS Spoofing● Access Control Lists (ACLs)● IPv4 and IPv6 multicast● Open Shortest Path First (OSPF)● Border Gateway Protocol (BGP)● Performance Routing (PfR)● Enhanced Interior Gateway Routing Protocol (EIGRP)● Virtual Route Forwarding (VRF) Lite● Next Hop Resolution Protocol (NHRP)● Bidirectional Forwarding Detection (BFD)● Web Cache Communication Protocol (WCCP)xDSL● True Multimode VDSL2 and ADSL2 over Annex A, B, J, and M, including traditional G.DMT and T1.413● World-class interoperability with industry-standard DSL Access Multiplexer (DSLAM) chipsets● Highest field reliability with Impulse Noise Protection (INP) over Repetitive Electrical Impulse Noise (REIN) and single isolated impulse noise (SHINE), extended INP delay, G.INP, physical layer retransmission, Seamless Rate Adaptation (SRA), and Bitswap● VDSL2 Persistent Storage Device (PSD) profiles up to 17a/b with support for spectral shaping● VDSL2 vectoring to offer blazing fiber speeds over copper● Remote management with TR069 and CWMP● Investment protection with Gigabit EthernetSwitch features● Auto Media Device In/Media Device Cross Over (MDI-MDX)● 25 802.1Q VLANs● MAC filtering● Switched Port Analyzer (SPAN)● Storm control● Smart ports● Secure MAC address● Internet Group Management Protocol Version 3 (IGMPv3) snooping● 802.1XSecurity featuresSecure connectivity:● Secure Sockets Layer (SSL) VPN for secure remote access● Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256● Public-Key-Infrastructure (PKI) support● 50 IPsec tunnels● Cisco Easy VPN client and server● NAT transparency● Dynamic Multipoint VPN (DMVPN)● Tunnel-less Group Encrypted Transport VPN (GET VPN)● VRF-aware IPsec● IPsec over IPv6● Adaptive control technology● Session Initiation Protocol (SIP) application-layer gateway● Cisco IOS Firewall:◦ Zone-based policy firewall◦ VRF-aware stateful inspection routing firewall◦ Stateful inspection transparent firewall● Advanced application inspection and control● HTTPS, FTP, and Telnet Authentication Proxy● Dynamic and static port security● Firewall stateful failover● VRF-aware firewall● Cisco IOS Software black and white lists● Control plane policing● Flexible packet matching● Network foundation protectionQuality of Service (QoS)● Low-Latency Queuing (LLQ)● Weighted Fair Queuing (WFQ)● Class-Based WFQ (CBWFQ), Class-Based Traffic Shaping (CBTS), Class-Based Traffic Policing (CBTP)● Policy-Based Routing (PBR)● Class-Based QoS MIB● Class of Service (CoS)-to-Differentiated Services Code Point (DSCP) mapping● Class-Based Weighted Random Early Detection (CBWRED)● Network-Based Application Recognition (NBAR)● Link Fragmentation and Interleaving (LFI)● Resource Reservation Protocol (RSVP)● Real-Time Transport Protocol (RTP) header compression (cRTP)● Differentiated Services (DiffServ)● QoS preclassify and prefragmentation● Hierarchical QoS (HQoS)Management● Cisco Configuration Professional● Cisco Configuration Express● Cisco Configuration Engine support● Cisco AutoInstall● Cisco IP Service-Level Agreement (IP SLA)● Cisco IOS Embedded Event Manager (EEM)● Cisco Security Manager● Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, Command-Line Interface (CLI), and HTTP management● RADIUS and TACACS ● Cisco Next Generation Plug-and-Play (NG PnP) ProtocolHigh availability● Virtual Router Redundancy Protocol (VRRP) (RFC 2338)● HSRP● MHSRPMetro Ethernet● Ethernet OA&M● Ethernet Local Management Interface (E-LMI)● IP SLA for EthernetIPv6● IPv6 addressing architecture● IPv6 name resolution● IPv6 statistics● IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation)● Internet Control Message Protocol Version 6 (ICMPv6)● IPv6 DHCP● OSPFv3● BGP4 ● IPv6 Path Maximum Transmission Unit (PMTU)● IPv6 neighbor discovery● IPv6 stateless address autoconfiguration (SLAAC)● IPv6 multicast routingApplication visibility and control● NBAR2● Flexible NetFlow (FNF)● Performance AgentNumber of recommended users● 50Default and maximum DRAM● Default 1 GBDefault and maximum flash memory● 2 GB on all Cisco 900 Series ISR models; not upgradableWAN● Refer to Table 2, 3 and 4 for detailsLAN switch● Refer to Table 2 for detailsSeparate console ports● RJ-45USB 2.0● One USB 2.0 Type A portNote: USB 2.0 ports cannot be used for connecting external devices other than those specified at: https://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.htmlPhysical dimensions, LEDs, and weightDimensions:● C921-4P, C931-4P, and C921-4PLTEXX◦ H x W x D = 1.70 x 9.0 x 9.5 in. (4.32 x 22.86 x 24.13 cm) (includes rubber feet)● C927-4P, C927-4PM, C926-4P, C927-4PLTEXX, C927-4PMLTEXX, and C926-4PLTEXX◦ H x W x D = 1.10 x 10.20 x 7.00 in. (2.80 x 25.91 x 17.78 cm) (includes rubber feet)LEDs:● 1x green per Ethernet● 2x green DSL – CD Data● 1x bicolor LED LTE RSSI● 1x green LED LTE SIM/Activity● VPN● System OKWeight: 2.65 lb (1.20 kg) maximumPower supplyPower specifications:● AC input voltage: Universal 100 to 240 VAC● Frequency: 50 to 60 Hz● Internal power supply (C921-4P, C931-4P, and C921-4PLTEXX only)● External power adapter (C927-4P, C927-4PM, C926-4P, C927-4PLTEXX, C927-4PMLTEXX, and C926-4PLTEXX only): 12 VDC; 30 WApprovals and complianceSafety:● IEC 60950-1● UL 60950-1● CAN/CSA C22.2 No. 60950-1● EN 60950-1● AS/NZS 60950.1● Class I Equipment (C921-4P and C931-4P only)● Class III Equipment (C927-4P, C927-4PM, and C926-4P only)Emissions:● 47 CFR Part 15: 2006◦ CISPR22: Edition 6.0: 2008◦ CNS13438: 2006◦ EN 300 386 V1.6.1◦ EN 55032◦ EN61000-3-2: 2006 [ amd 1 & 2]◦ EN61000-3-3: 2008◦ ICES-003 Issue 5: 2012◦ KN 22: 2009● TCVN 7189: 2009● VCCI: V-3/2012.04Immunity:● CISPR24: 2010 [ amd 1 & 2]◦ EN300386: V1.6.1◦ EN55024: 2010◦ EN61000-6-1: 2007◦ KN24: 2011◦ TCVN 7317:2003Environmental operating range● Nonoperating temperature: -40° to 158°F (-40° to 70°C)● Nonoperating humidity: 5% to 95% relative humidity (noncondensing)● Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m)● Operating temperature:◦ C921-4P and C931-4P: 0° to 50°C (de-rate 1°C per 1000-ft increase in altitude)◦ C927-4P, C926-4P, C927-4PM, C921-4PLTEXX,: 0° to 45°C (de-rate 1°C per 1000-ft increase in altitude)● Operating humidity: 5% to 95% relative humidity (noncondensing)● Operating altitude: 0 to 10,000 ft (0 to 3000 m)Related
Network
